Vendors & EquipmentJuniper NetworksFaaHpeAir Traffic Control

FAA halts Juniper router installations after US flight ground stop

FAA disabled more than 60 Juniper Networks routers and halted new installs after one unit flooded the US air-traffic network, which the agency linked to a November 13 flight ground stop.

4 min read

FAA suspends installation of router that led to a ground stop of flights across the USVendors & Equipment
FAA suspends installation of router that led to a ground stop of flights across the USRitaE / pixabay

Why it matters

  • The FAA disabled more than 60 installed routers and suspended new Juniper installations.
  • The FAA believes one router played a major role in the November 13 US flight ground stop.
  • The router had worked well in 68 tests during a year of testing.
  • Two routers at El Dorado, Arkansas, and Amarillo, Texas, malfunctioned; the FBI joined the Arkansas analysis.
  • Duffy requested an additional $50 billion for US air traffic control modernization.

The story

By Rebecca Stone

The FAA has disabled more than 60 routers and suspended new installations of a router model from Juniper Networks, owned by Hewlett Packard Enterprise (HPE), after the agency said it believed one unit played a major role in a ground stop for all US flights on November 13.

The suspension forms part of the FAA's wider modernization effort. The available account cites no Juniper performance claim or company response, and it does not identify the router model. Nor does it report a wider recall, leaving the FAA's action and the scale of its own installed base as the concrete deployment consequences.

What caused the November 13 ground stop?

Transport Secretary Sean Duffy said L3Harris, an FAA contractor, was switching telecommunications lines from old copper wires to fiber and installing the new router at an FAA site in El Dorado, Arkansas. The unit began flooding other routers in the air traffic control system with data. A second router in Amarillo, Texas, also malfunctioned, and the FAA disabled both.

The episode complicates Duffy's earlier account. At his first public explanation of the ground stop, the secretary blamed old hardware. A day later, he said the issue was connected to the modernization of America's aviation facilities.

Routers in the air traffic control system transmit data including radar feeds, flight plans and weather information. The account does not say which of those feeds were interrupted, whether any data was corrupted, or how long the overload lasted.

What does the test record show?

The router had been tested for a year before installations began. Duffy said at a news conference: "Sixty-eight times it worked well." He then described the exception: "This one router started to broadcast into our network, and it started to overload the network."

Those 68 successful runs followed by one unit broadcasting into the network provide the only direct performance comparison in the account. They do not explain the difference. The report provides no test conditions, traffic volumes, diagnostic output or account from Juniper, so the testing history establishes prior success rather than a cause.

Why is the cause still unresolved?

FAA administrator Bryan Bedford said the agency still did not know what triggered the malfunction, even though it had identified the router as the cause. Democratic members of the Senate Commerce, Science and Transportation Committee are urging the FAA to find out why it failed and report to Congress on how to prevent recurrence.

Duffy said national security agencies told him the incident was not caused by a cyberattack. That is an attributed assessment, not a forensic finding contained in the account. At the same time, he asked the FBI to join the team analyzing the router from Arkansas.

With more than 60 installed routers disabled, the operational response extended beyond the two named sites. New installations remain barred under the suspension, and the report gives no restoration or replacement timetable.

Can the modernization push continue?

Duffy renewed his call for Congress to approve an additional $50 billion for modernization of the US air traffic control system. The request is broader than the router response and relates to the wider shift from old copper infrastructure, including the fiber work at El Dorado.

The report does not earmark any part of the request for replacing the disabled routers, and it identifies no awarded contract for that work. The immediate commercial fact is therefore a stopped deployment and more than 60 disabled units; the $50 billion remains a funding request, not committed procurement spending.

Duffy's case for the investment is blunt: "I would just tell you, the longer we stay on an old rickety network, the less safe it becomes," he said. "We do have to get this work done. Otherwise, staying on the old system for longer is going to mean more risk as opposed to fixing the system, and you're going to reduce the risk."

That statement supplies a safety judgment rather than a quantified forecast; the account cites no comparative safety data.

The next milestones are administrative: the FAA must identify the trigger, brief Congress on prevention and decide when to lift the installation ban. Congress also has to act on the additional $50 billion. Until those steps occur, the rollout has no published timetable, and the cost of replacing or repairing the disabled equipment remains unspecified.

Also reported

Source: engadget.com

Share this article:

« PreviousNext »

More from Rebecca Stone

Rebecca Stone

Show full bio

Correspondent covering technology and product news in Carrier business, 5G and 6G, fiber and broadband at Telecom Gazette.

539 articles