Video & BroadcastCrewcom FlexBroadcast IntercomAes67Smpte St 2110

Pliant Ships CrewCom Flex, a Frameless AES67 Intercom Line, in the US

Pliant Technologies has begun US shipments of CrewCom Flex, a frameless matrix intercom line built on AES67 and SMPTE ST 2110 with distributed processing in every panel.

3 min read

Pliant Technologies Ships CrewCom FlexVideo & Broadcast
Pliant Technologies Ships CrewCom FlexEric Prouzet / unsplash

Why it matters

  • Pliant Technologies has begun shipping CrewCom Flex in the United States.
  • The system uses AES67, SMPTE ST 2110 and ST 2022-7 compliance on a frameless distributed architecture.
  • Virtual Intercom ships in 4-, 8-, 16- and 36-key browser-based configurations.
  • A 32x32 Dante/AES-67 interface [CXD-32CF] links Flex to existing CrewCom wireless systems.
  • Management runs on the updated CrewWare 2.0 software.

The story

Pliant Technologies has begun shipping CrewCom Flex, a frameless matrix intercom line, to customers in the United States. The Auburn, Alabama company has built the system on an AES67 and SMPTE ST 2110 backbone, removing the centralized hardware frame that has defined matrix intercom design for decades.

For broadcast, live event, sports and corporate AV teams, that architecture change matters at the budget line. Pliant Vice President of Global Sales Gary Rosen said the design targets "the changing realities of modern production communications." He added: "By eliminating the traditional matrix frame, we're providing customers with greater flexibility, lower total cost of ownership, simplified system management and nearly limitless scalability."

That is a vendor claim, not an audited figure. Pliant supplied no pricing, no deployment counts and no named customers in the announcement. Practitioners should read the cost-of-ownership argument as directional until real installations publish numbers. The architecture claim, however, is concrete and verifiable in the product design.

What does frameless actually mean?

Traditional matrix intercom systems route audio through a centralized frame. If that frame fails, the whole system goes down. CrewCom Flex instead distributes the matrix into the endpoints themselves. Each panel and desktop panel functions as its own intelligent distributed matrix, Pliant said. The company argues this eliminates single points of failure and allows scalability without frame expansions.

The line centers on four hardware products:

  • CrewCom Flex Main Panel [CKP-16] — the core rack panel combining hardware familiarity with distributed IP processing
  • Desktop Panel [CDP-16] — the desk-side equivalent of the main panel
  • Four-channel belt pack [CBP-24] — a portable unit with an integrated microphone and speaker, so users can talk without a headset
  • 32x32 Dante/AES-67 Digital Audio Network Interface [CXD-32CF] — the bridge that routes audio into and out of existing CrewNet infrastructure over EtherCon copper and dual LC fiber

Users can stack expansion panels onto these units to build custom user stations.

How does it fit into existing plants?

The standards story is the practical selling point for broadcast engineers. CrewCom Flex supports AES67 and SMPTE ST 2110 for audio-over-IP and VoIP integration, and it complies with ST 2022-7, the seamless protection switching standard used in mission-critical broadcast contribution. In plain terms, an ST 2022-7 system duplicates packets across two network paths; if one path fails, the receiver continues without interruption.

The line also integrates directly with existing CrewCom wireless intercom deployments through the CXD-32CF interface. That gives installed-base customers a migration path rather than a rip-and-replace.

System configuration and management run through the updated CrewWare 2.0 software.

What about remote production teams?

CrewCom Flex Virtual Intercom extends the line beyond hardware. The browser-based VoIP client ships in four configurations: 4-, 8-, 16- and 36-key virtual user stations. It runs standalone or integrates into larger Flex deployments. Access works from PCs, Macs, tablets and mobile devices, which addresses remote and distributed production teams — a workforce pattern that has become routine since 2020.

Each virtual panel adds a potential user seat without adding rack space or cabling, though Pliant has not published per-seat licensing costs.

What happens next?

The hardware is shipping now in the US, and Pliant has posted full specifications on its website. The unanswered questions are price, availability outside the United States, and whether the frameless architecture delivers the lower total cost of ownership Rosen claims once real deployments accumulate operating hours.

Also reported

Share this article:

« PreviousNext »

More from Daniel Okafor

Daniel Okafor

Show full bio

Senior reporter covering regulation, policy and their impact on Carrier business, 5G and 6G, fiber and broadband at Telecom Gazette.

540 articles